PROMASTERTOOL™ Adjustable Angle Drill Guide

Guide your handheld drill through straight and angled holes

Bring a guided drilling setup to your woodworking projects with the PROMASTERTOOL™ Adjustable Angle Drill Guide. The aluminum alloy frame combines a built-in drill chuck, two spring-loaded guide columns, and an adjustable angle scale from 0° to 60°. Connect your handheld drill to the guide's drive shaft, choose your setting, and guide the bit into the workpiece.

• 0° to 60° angle adjustment. Set the guide upright for straight drilling or tilt it to suit an angled hole.
• Guided plunge travel. Two columns support the sliding chuck while the springs assist its return as pressure is eased.
• Positioning attachments. Use the rods and movable guides to establish a repeatable reference from a board edge.

Set the angle before you drill

Use the marked scale to select your drilling angle, then lock the adjustment before starting the cut. The side handles give you a place to hold and support the guide during the setup. Make a test hole in an offcut to confirm the angle and position for your project.

Control the plunge and repeat the setup

The chuck travels along the two guide columns to keep the bit on the selected drilling path. An adjustable stop collar provides a reference for limiting plunge travel when you need to repeat a depth setting. Choose a suitable bit that fits the integrated chuck and check the required drilling depth before use.

Position the hole from the board edge

Adjust the positioning rods and guides to reference the edge of your workpiece. Keep the same reference when moving to the next drilling location. The opening in the base gives you a view of the drilling area while you align the bit.

Specifications and included parts

Connect, position, and drill

1. Fit the bit. Secure a suitable drill bit in the guide's integrated chuck.
2. Connect your drill. Secure the guide's input shaft in the handheld drill's chuck.
3. Set the guide. With power off, adjust and lock the angle, positioning guides, and stop collar as needed. Secure the guide and workpiece so they cannot shift.
4. Drill with controlled pressure. Follow your drill and bit manufacturer's operating guidance. Withdraw the bit before repositioning the setup.

Angled drilling setup illustration. The handheld drill and drill bit are not included.

Use the guide for board drilling, furniture projects, workshop assembly, and other woodworking tasks where you want to set and repeat the drilling direction. Handheld drills, drill bits, wood, and other workshop equipment shown in the images are for illustration and are not included.