PROMASTERTOOL™ CNC Spoilboard Insert Carbide 4 Wing

Features:

• This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurfacing, or plane the top surface of the spoil board, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking
• 4 wings wood CNC router, Shank: 1/2"; Cut diameter: 2-1/2"; Carbide Inserts 12*12*2.2mm,
• Contains four cutting flutes, which provide a better cutting result
• MDF, LDF, fiberboard, plastic, plywood, hardwood, softwood, etc
• Use on CNC and other automatic routers, as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines, etc.
  
  

  Efficiency

  You can make this flattening process buttery smooth if you are equipped with the right tools.

  
  

  
  

  Cost-effective

  All edges of carbide inserts can be used. Replace the carbide inserts when needed, instead of replacing the whole bit.
  
  
  
  

  Customized Insert

  2.2mm insert thickness will prevent marring，provide a long using life.
  
  
  
  

  Safety Guidelines

  BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. PROMASTERTOOL™ Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
  of any product (including sharpening).  

  WARNING: Re-grinding of PROMASTERTOOL™  products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.